High Viscosity Flocculant/Anionic Polyacrylamide for Mining Use
Product introduction
Polyacrylamide is a type of polyelectrolyte that has been widely used in water treatment industry because of its low dosage requirement, high efficiency, and pollution-free effects.
For paper making indusrty, PAM can be regarded as a retention aid, a sort of very-high-mass, water-soluble polymers that are added to cellulosic fiber slurries before the formation of paper in order to improve the efficiency with which fine particles, including cellulosic fines, are retained in the paper product. Optimization of retention aid performance can be a key to achieving efficient and environmentally responsible papermaking objectives.
| Item | Specification |
| Product Name | Polyacrylamide / Flocculant |
| Appearance | White crystal granular |
| CAS No. | 9003/5/8 |
| Molecular Weight (million)) | 5-15 |
| Dgree Of Hydrolysis | ≤6% |
| Purity | ≥90% |
| Remainder Monocase | ≤0.05% |
| Efficiency PH Scope | ≤1-8 |
| Packing | 25kg / bag, 1 ton / pallet |
| Odour | Odorless |
| Causticity | Non-corrosive |
| Thermal stability | Easy to Decompose when Temperature above 120° |
PAM Instruction for Use
1. Dissolution: Dissolve polyacrylamide in water to make a 0.5-5‰ solution. Do add polyacrylamide into water in a gradual and continuous way.
2. Blending: Don’t blend the solution to hard or too fast. Suggested rotational speed of blender: 60-200 rpm.
3. Container: Do dissolve polyacrylamide in containers made of enamel, aluminum or plastic. Do not use iron containers to dissolve or keep polyacrylamide, the effect of the solution will be affected due to degradation otherwise.
4. Industrial Waste Water Treatment:
Water sources of many tap water factories come from rivers, the sand and mineral contents are higher, water is muddy, the water still can not achieve demands although passing through sedimentation and filtration, and flocculating agent needs adding; however huge adding amount generates increased mud amount and bad effect. The adding amount is only 1/50 of inorganic flocculating agent if anionic-polyacrylamide is adopted as flocculating agent, but the effect is several times better than the organic flocculating agent, and even dozens of times.
Company profile
Y&X Beijing Technology Co., Ltd,is a professional metal mine beneficiation solution provider, with world-leading solutions for refractory beneficiation. Over the years, we have accumulated rich successful experience in the fields of copper, molybdenum, gold, silver, lead, zinc, nickel, magnesium, scheelite and other metal mines, rare metal mines such as cobalt, palladium, bismuth and other non-metal mines such as fluorite and phosphorus. And can provide customized beneficiation solutions according to the customer's ore properties and production conditions, including the most advanced beneficiation methods, the most efficient beneficiation reagents, to ensure maximum benefits for customers.
Over the years since its establishment, the company has focused on the R&D, production and application of efficient and Eco-friendly beneficiation reagents, provide effective support for the construction of green mines; improve the efficiency of beneficiation reagents, thus improving the effective utilization of resources; Some of our new flotation reagents have enabled some mines which cannot normally produce products to achieve industrialized production, turning waste into treasure!
Y&X people's mission is to make all mines in the world to be selected! This is the driving force and source of Y&X people's struggle! Y&X people always keep our mission in mind and strive hard to overcome difficulties and move forward on this mission!
Our company's products mainly include:
High-efficiency frother, its using effect is better than common frother such as terpineol oil, MIBC, etc;
High-efficiency collector, which can improve the metal recovery rate to a greater extent than traditional collectors;
The pioneering depressant is a powerful tool for solving complex refractory beneficiation of high talc, high carbon and high fine mud/ clay. The special copper depressant provides a better solution for beneficiation operations such as copper and molybdenum separation;
High-efficiency activators and regulators are also the cornerstone of our company to improve the beneficiation index;
Compared with the world's top brands, our flocculant has better cost performance and richer experience in mining applications.
Y&X Company is willing to provide you with the best one-stop beneficiation solution. Hand in hand for a win-win situation, we sincerely look forward to cooperating with you!
FAQ
Q1.Where is your factory located?
Our factory is in Shandong, China. Located in an independent chemical park.
Q2.Can you give me a better price?
We value the cooperation with each customer and will provide you with the most favorable price.
Q3. How can you guarantee your quality?
Our production adopts fully automated production control to ensure the continuity of production and the stability of quality.
We have a strict production quality management system. Strict quality control is implemented on the raw materials, semi-finished products, finished products and products leaving the factory.
Quality first has always been the basic principle of our company. We also support customers to obtain samples for testing.
Q4.When is the delivery time?
Our production capacity: Xanthate: 50,000t/a; Dithiophosphate: 20,000t/a; Frother: 10,000t/a
For conventional products, we will keep inventory to ensure timely delivery within the time required by customers.
Q5:Which type of shipping would be better?
In consideration of the requirements of the customers in different regions, we make deliveries by sea, air, train, truck, etc.
Q6:What's the convenient way to pay?
Bank T/T, Paypal are accepted. If you have a better idea, welcome to share with us.
Q7: Can I get a sample?
Yes, you are welcome to get samples for testing.
Product Tags:
|
|
High Viscosity Anionic Polyacrylamide Flocculant For Mining Use Images
|
